LS-693
9. LS-693 P-Tert-Butylphenyl Glycidyl Ether
9.1.Product Introduction
Chemical name: P-Tert-Butylphenyl Glycidyl Ether
Structural Formula: p-C4H9C6H4OCH2(CHCH2)O
CAS No.:3101-60-8
Specific Gravity:1.05 Boiling point: 175℃(20 mm Hg)
Appearance& Character : Colorless oy yellowish transparent liquid. Low irritant, low viscosity. Molecules contain benzene, ether bond and epoxy group, with rigid chain segments in the structure. It possesses the properties of good heat resistance and anti-corrosion, and owns strong dilution ability as well.
9.2. Technical Data Sheet（TDS）
| Specification | Specification | Specification | Specification | Specification | Specification | Specification | |||||
| Item |
(APHA)
|
（25℃, mPa•s）
|
（Eq/100g）
|
(g/eq )
|
HY-CL（Eq/100g） | Inorganic Chlorine（Eq/100g） | Moistmure（%） | ||||
| LS-693 | ≤50 | ≤30 | 0.40-0.45 | 222-250 | ≤0.02 | ≤0.005 | ≤0.1 |
9.3.Applications
As a common epoxy reactive diluent , the dilution ability of LS-693 is very good. It possesses high reactivity, can be formed uniform system after curing,
It’s widely used in coatings, laminates, electronic packaging, adhesives and so on
It helps form a hard curing products and improve electric property of condensate.
9.4. Packing
Packed in 25 kg/plastic drums or 200 kg/plastic drum or iron drum
9.5. Attention in storage
9.5.1. Storage and transportation must conform to basic requirements of normal chemicals.
9.5.2. Stored in a cool, dark, dry and well ventilated area for one year. Keep away
from ignition sources, heat and flame and sunlight.
9.5.3.It is necessary to maintain insulated (tightly seal) after use, in order to avoid
negative influence arousing from moisture absorption.
9.5.4. This product irritates to the skin and eyes. If contact with skin, wash with soap; if contact with eyes, rinse with plenty of water.